The Synthesis and Properties of Monophosphane – Part of The Chemistry of Breaking Bad

  • ChemPubSoc Europe Logo
  • Author: Falk Harnisch, Tunga Salthammer
  • Published Date: 30 October 2013
  • Source / Publisher: Chemie in Unserer Zeit/Wiley-VCH
  • Copyright: Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim



The Synthesis and Properties of Monophosphane

Monophosphane (PH3) is a very strong nerve toxin. Walter explains to Jesse how it is produced as follows: “red phosphorus in the presence of moisture and accelerated by heat yields phosphorus hydride … phosphine gas”. This explanation is certainly sufficient for Jesse, but it is not technically accurate. When heated, phosphorus disproportionates in the presence of water to PH3 and hypophosphoric acid. The latter can, forming PH3 at each stage, continue its reaction to phosphoric acid and then to phosphorus acid.


2 P4 + 12 H2O → 2 PH3 + 6 H3PO2 → 4 PH3 + 4 H3PO4 → 5 PH3 + 3 H3PO4


When heated in sodium hydroxide solution, the reaction can be directed toward the products by the formation of sodium hypophosphite.


P4 + 3 NaOH + 3 H2O → PH3 + 3 NaH2PO2


In the Hollemann–Wiberg textbook [12], both reactions are described for white phosphorus instead of red phosphorus.


Walter’s plan to eliminate Emilio and Krazy-8 with PH3 is completely feasible in the given circumstances. The gas irritates the eyes, skin, and respiratory organs. A fatal oedema of the lungs is possible after a time [13]. The LD50 level for rats is 10 ppm after 4 hours of inhalation. There is however the risk of an explosion because PH3 is self-combusting at more than 1.6 vol % in the air. There would have been enough potential sources of ignition in the RV, so Walter would have to be quick in fleeing.


References

[12] N. Wiberg, Hollemann–Wiberg: Lehrbuch der Anorganischen Chemie, 102 Ed., Walter de Gruyter, Berlin, 2007.
[13] Air Liquide Deutschland GmbH, Sicherheitsdatenblatt Phosphin (gemäß RL 1907/2006EG). Rev.-Ausgabe Nr. 3-01 vom 7.2.2011, Sicherheitsdatenblatt-Nr.: 100-ALD, Düsseldorf.

Article Views: 2926

Sign in Area

Please sign in below

Additional Sign In options

Please note that to comment on an article you must be registered and logged in.
Registration is for free, you may already be registered to receive, e.g., the newsletter. When you register on this website, please ensure you view our terms and conditions. All comments are subject to moderation.

Article Comments - To add a comment please sign in

Bookmark and Share

If you would like to reuse any content, in print or online, from ChemistryViews.org, please contact us first for permission. more


CONNECT:

ChemistryViews.org on Facebook

ChemistryViews.org on Twitter ChemistryViews.org on YouTube ChemistryViews.org on LinkedIn Sign up for our free newsletter


A product of ChemPubSoc Europe (16 European Chemical Societies)and Wiley-VCH