How To Remove Disinfection Byproducts from Pools

  • Author: ChemistryViews.org
  • Published: 27 July 2019
  • Copyright: Wiley-VCH Verlag GmbH & Co. KGaA
  • Source / Publisher: Environmental Science & Technology/ACS Publications
  • Associated Societies: American Chemical Society (ACS), USA
thumbnail image: How To Remove Disinfection Byproducts from Pools

Swimming pools can be contaminated by, e.g., bacteria, viruses, fungi, and bodily fluids. This means they require continuous water treatment and disinfection, usually using chlorination. However, the chlorine-based compounds used for pools, most often hypochlorites, can react with organic compounds in the pool and form harmful disinfection byproducts (DBPs). Common examples of DBPs are trihalomethanes, halogenated acetic acids, chloramines, and haloacetonitriles. DBPS can, for example, irritate eyes and skin and cause breathing problems.


Bertram Skibinski, Technical University of Munich, Garching, Germany, and Technische Universität Dresden, Germany, Wolfgang Uhl, Technische Universität Dresden, Norwegian Institute for Water Research (NIVA), Oslo, and Norwegian University of Science and Technology (NTNU), Trondheim, and colleagues have tested different combinations of water treatment processes using a swimming pool model operated under reproducible and controlled conditions. Among other methods, the team tested combinations of coagulation, sand filtration, granular activated carbon (GAC) filtration, membrane filtration, and ultraviolet (UV) irradiation and checked how efficiently the processes lowered the concentration of DBPs and their precursors in the pool water.


The researchers found that most treatment combinations removed some of the trihalomethanes and most of the trichloramine and dichloroacetonitrile. However, the effective removal of DBPs during water treatment did not necessarily give low DBP concentrations in the pool itself. Trichloramine, in particular, forms so fast that its removal during water treatment cannot compensate for its production in the pool.

Overall, the team recommends a combination of sand filtration with GAC filtration to achieve low levels of DBPs. They do, however, point out that GAC filters can be microbiologically contaminated and have to be checked frequently.



Also of Interest

 

Article Views: 654

Sign in Area

Please sign in below

Additional Sign In options

Please note that to comment on an article you must be registered and logged in.
Registration is for free, you may already be registered to receive, e.g., the newsletter. When you register on this website, please ensure you view our terms and conditions. All comments are subject to moderation.

Article Comments - To add a comment please sign in

Bookmark and Share

If you would like to reuse any content, in print or online, from ChemistryViews.org, please contact us first for permission. more


CONNECT:

ChemistryViews.org on Facebook

ChemistryViews.org on Twitter ChemistryViews.org on YouTube ChemistryViews.org on LinkedIn Sign up for our free newsletter


A product of ChemPubSoc Europe (16 European Chemical Societies)and Wiley-VCH