Transient Electronics

  • Author: Jenna Pope
  • Published: 02 November 2015
  • Copyright: Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim
  • Source / Publisher: Journal of Polymer Science Part B: Polymer Physics/John Wiley & Sons
thumbnail image: Transient Electronics

Transient electrons are made to operate for a limited time before degrading away. One method for inducing transiency is through solvent-triggered dissolution. Reza Montazami, Iowa State University, Ames, USA, and colleagues control the life time of an electronic device through the use of colloidal electronic components mounted on a water-soluble polymer film.


The polymer film was made of poly(vinyl alcohol) (PVA), while the circuit consisted of conductive silver paste. Upon exposure to water, hydrogen bonds form between the water molecules and hydroxyl groups of the PVA, which causes the polymer chains to disentangle and diffuse apart. As the polymer matrix dissolves, the colloidal particles that form the circuit lose their mechanical support and disperse into solution.


After an hour of exposure to water, the circuit’s shape could be identified, but in the form of almost individual particles. By adding a sucrose to the PVA matrix in a 10:1 ratio of PVA:sucrose, the dissolution time could be reduced to 10 minutes. Larger amounts of sucrose reduced the dissolution time further.


Controlling the dissolution time in this manner allows for a variety of applications, such as biological sensors for the slow-dissolving devices and sensors for military use for the quickly dissolving devices. Furthermore, the circuitry could be preserved in the quickly dissolving devices by application to another surface, such as human skin or plants, similar to the transfer of a temporary tattoo.


 

Article Views: 3685

Sign in Area

Please sign in below

Additional Sign In options

Please note that to comment on an article you must be registered and logged in.
Registration is for free, you may already be registered to receive, e.g., the newsletter. When you register on this website, please ensure you view our terms and conditions. All comments are subject to moderation.

Article Comments - To add a comment please sign in

If you would like to reuse any content, in print or online, from ChemistryViews.org, please contact us first for permission and consult our permission guidance prior to making your request

Follow on Facebook Follow on Twitter Follow on YouTube Follow on LinkedIn Follow on Instagram RSS Sign up for newsletters

Magazine of Chemistry Europe (16 European Chemical Societies) published by Wiley-VCH