Direct Electrochemical Synthesis of NH3 from N2 and H2O

  • Author: ChemViews Magazine
  • Published Date: 19 February 2020
  • Source / Publisher: Chemie Ingenieur Technik/Wiley-VCH
  • Copyright: Wiley-VCH Verlag GmbH & Co. KGaA
thumbnail image: Direct Electrochemical Synthesis of NH<sub>3</sub> from N<sub>2</sub> and H<sub>2</sub>O

The Haber process for producing NH3 is the most important chemical process developed in the 20th century. At 400 to 500 °C and 150 to 200 bar, N2 and H2 react to form NH3. The required H2 is produced by the reformation of CH4 or coal with H2O. For each ton of NH3 produced, approximately 2 t CO2 are emitted. The elimination of this CO2 emission as well as to omit the use of carbon sources for H2 production are highly desired. Around 80 % of the produced NH3 is converted to be used as fertilizer.

A potentially more sustainable NH3 synthesis method is the direct reduction of N2 using an electrochemical membrane reactor (ecMR). It avoids CO2 emission, if renewable energy sources, such as wind or solar power, are used to power the process.

An ecMR consists of an anode for water oxidation, a proton exchange membranes (PEM), and a cathode for the desired reduction as well as parallel reactions. The workability of the ecMR for the electrochemical reduction of CO2 to synthesize hydrocarbons was proved, however, at very low production rates and current efficiencies.

Matthias Wessling and colleagues, DWI – Leibnitz Institute for Interactive Materials, Aachen, Germany, have used an ecMR process for the simultaneous generation of NH3 and H2 (pictured). The process is carbon‐independent and CO2‐free: H2O is used as an abundant source of H2, and renewable energy can potentially drive the reaction.

The core of the ecMR is the membrane electrode assembly (MEA). It combines (i) the oxygen evolution reaction (OER) at the anode (H2O is oxidized to form O2 and electrons), (ii) the migration of H+ ions across the polymer cation exchange membrane (CEM) to the cathode, and (iii) the reduction of N2 to NH3 at the cathode. The main (parallel) reaction at the cathode is a reduction of H+, i.e., the hydrogen evolution reaction (HER). The MEA presented here consisted of three elements: a) an iridium mixed metal oxide (IrMMO) anode, b) a polymer CEM, and c) a Ti cathodic catalyst

According to the researchers, the ecMR demonstrates the workability to co‐generate NH3 and H2 directly from nitrogen and water vapor at ambient conditions. An exceptional high NH3‐specific current efficiency of up to 27.5% is reported. The co‐generation can be tuned by the balance of process parameters. This synthesis is a viable option to store energy and produce fertilizer precursors.

According to the researchers, their work encourages further research on catalysts for the electrochemical synthesis of NH3 to make the process more efficient in terms of NH3 selectivity and production rates. In their opinion, there are several ways to improve the achieved production rate and current efficiency of the ecMR.


Article Views: 894

Sign in Area

Please sign in below

Additional Sign In options

Please note that to comment on an article you must be registered and logged in.
Registration is for free, you may already be registered to receive, e.g., the newsletter. When you register on this website, please ensure you view our terms and conditions. All comments are subject to moderation.

Article Comments - To add a comment please sign in

Bookmark and Share

If you would like to reuse any content, in print or online, from ChemistryViews.org, please contact us first for permission. more


CONNECT:

ChemistryViews.org on Facebook

ChemistryViews.org on Twitter ChemistryViews.org on YouTube ChemistryViews.org on LinkedIn Sign up for our free newsletter


Magazine of Chemistry Europe (16 European Chemical Societies)published by Wiley-VCH