Polymer-Film Heat Exchangers Improve Seawater Desalination

  • Author: Cordula Buse
  • Published Date: 15 June 2020
  • Source / Publisher: Chemical Engineering & Technology/Wiley-VCH
  • Copyright: Wiley-VCH Verlag GmbH & Co. KGaA
thumbnail image: Polymer-Film Heat Exchangers Improve Seawater Desalination

To ensure the supply of freshwater in dry regions of the world, seawater is desalinated in a staged process called multiple-effect distillation (MED). The seawater is heated, and the steam is fed into the next stage, diminishing the mineral components in the water in each step. A major problem, however, is the fouling of the heat exchangers. Over time, the inorganic salts accumulate and deposit on the heat-exchanger layer. This not only effects the desalination performance, but also increases costs due to the continuous need for scale-reducing chemicals and maintenance shutdowns.

Hans-Jörg Bart, TU Kaiserslautern, Germany, and colleagues have investigated polymer-film heat exchangers made of polyether ether ketone (PEEK) as heat-exchanger materials in seawater thermal desalination processes. The team measured the fouling resistances of pure PEEK films, PEEK films with a talcum filler, and stainless‐steel films in a pilot plant using artificial seawater. A lower roughness, such as displayed by the pure PEEK film, leads to lower adhesion forces, and therefore, less scaling. Since the fouling layer is very fragile and brittle, it can detach itself (pictured) under the flow of seawater.

This provides a good basis for in situ cleaning, since a temporary increase in flow velocity can remove the scale buildup and no lengthy process shutdowns are necessary. It also removes the need for anti-fouling chemicals. It can be concluded that a thin coating of PEEK polymer material is a viable alternative to the traditionally used metallic heat-exchanger surfaces and could significantly reduce the overall costs of seawater desalination.



Article Views: 3549

Sign in Area

Please sign in below

Additional Sign In options

Please note that to comment on an article you must be registered and logged in.
Registration is for free, you may already be registered to receive, e.g., the newsletter. When you register on this website, please ensure you view our terms and conditions. All comments are subject to moderation.

Article Comments - To add a comment please sign in

If you would like to reuse any content, in print or online, from ChemistryViews.org, please contact us first for permission and consult our permission guidance prior to making your request

Follow on Facebook Follow on Twitter Follow on YouTube Follow on LinkedIn Follow on Instagram RSS Sign up for newsletters

Magazine of Chemistry Europe (16 European Chemical Societies) published by Wiley-VCH