How Green Is Your Plastic?

  • Author: Angewandte Chemie International Edition
  • Published Date: 20 July 2021
  • Copyright: Wiley-VCH GmbH
thumbnail image: How Green Is Your Plastic?

Despite the best efforts of industry to work towards sustainability, most plastics (or polymers) are still made using non-renewable fossil fuels. However, Christophe M. Thomas, PSL University, Chimie ParisTech, CNRS, Institut de Recherche de Chimie Paris, France, and colleagues have found an economical method for producing biobased acrylate resins. The work shows how all the synthesis steps, from initial building blocks right up to polymerization, can be carried out in a single reactor, minimizing environmental impact.




Polyacrylates and Polymethacrylates

Most varnishes, adhesives, and paints are made from acrylate resins, which are polymers of acrylic acid esters and methacrylic acid esters. The raw materials that form these esters are acrylic or methacrylic acid and alcohols. The alcohols give the plastics their properties, such as softness or hardness and water absorption or repulsion.


To make these polyacrylates and polymethacrylates more sustainable, the team used alcohols from biobased or natural sources, rather than fossil sources. These included plant-based lauryl alcohol, menthol, tetrahydrogeraniol (a pheromone-like substance), vanillin, and ethyl lactate.




Economical One-Pot Synthesis

In addition to sustainability through renewable resources, the team also targeted synthesis in as few steps as possible, in other words, a one-pot process. This meant they had to find catalysts that were suitable for several steps of the process, and also to finely tune all the other synthesis conditions, such as solvents, concentrations, and temperatures.


The first step in this kind of synthesis is the activation of acrylic or methacrylic acid. The researchers were able to identify catalysts from simple salts. These substances were also suitable for the next step, reacting the biobased alcohols with acrylic or methacrylic anhydride to give the corresponding esters, which are the building blocks of the subsequent polymer.


"This monomer preparation step is highly efficient and allowed us to perform the polymerization in the same reactor," says Thomas. Thus, without purifying the intermediate products, the team was ultimately able to produce block copolymers, which are widely used in plastics production, from two or three different individual polymers produced separately.




New Library of Polymers

The team's biobased plastics had a number of beneficial properties, depending on the monomers making them up. For example, the resin produced with a lactic acid side chain (poly(ELMA)) was hard and brittle, while the one produced with the more flexible tetrahydrogeraniol side chain (poly(THGA)) was pliable at room temperature. The researchers emphasize the numerous available possibilities thanks to the wide variety of biobased alcohols at their disposal.


Aside from the versatility of the team’s approach, their one-pot synthesis also helps reduce the environmental footprint. Since work-up solvents account for a large proportion of the E-factor, or environmental impact, of plastics synthesis, one-pot processes without work-up obviously greatly reduce this factor. Their most successful synthesis reduced the E-factor by three quarters, demonstrating the significance of this research.


 

 

Article Views: 965

Sign in Area

Please sign in below

Additional Sign In options

Please note that to comment on an article you must be registered and logged in.
Registration is for free, you may already be registered to receive, e.g., the newsletter. When you register on this website, please ensure you view our terms and conditions. All comments are subject to moderation.

Article Comments - To add a comment please sign in

If you would like to reuse any content, in print or online, from ChemistryViews.org, please contact us first for permission and consult our permisson guidance prior to making your request

Follow on Facebook Follow on Twitter Follow on YouTube Follow on LinkedIn Follow on Instagram RSS Sign up for newsletters

Magazine of Chemistry Europe (16 European Chemical Societies) published by Wiley-VCH