Chlorine-Free Red Pyrotechnics

  • Author: ChemViews
  • Published Date: 18 August 2015
  • Source / Publisher: Angewandte Chemie International Edition/Wiley-VCH
  • Copyright: Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim
thumbnail image: Chlorine-Free Red Pyrotechnics

Red pyrotechnic flames are of importance for highway flares, marine distress signals, tactical signaling and for firework displays. Hitherto it was believed that highly saturated deep red pyrotechnic flames based on strontium require the presence of chlorine compounds to generate the transient strontium(I) chloride, which is a strong emitter in the red spectral range. The jointly formed strontium(I) hydroxide, always seen in the spectra of chlorinated formulations, was believed to be a vastly inferior emitter.

Ernst-Christian Koch, Technische Universit├Ąt Kaiserslautern, Germany, Jesse J. Sabatini, U.S. Army Research Laboratory, (RDECOM), Maryland, USA, and colleagues found that strontium-based red pyrotechnic flares having high saturation and long dominant wavelength can be formulated entirely without chlorine compounds and thus avoid any risk for formation of suspected carcinogenic chlorocarbon compounds upon combustion.

The team found that highly saturated red flames based on magnesium/strontium nitrate and a Laminac/Epon binder system can be obtained when moderate amounts of either 5-amino-1-H-tetrazole (CH3N5) or hexamine (C6H12N4) (both established pyrotechnics components) are added. They reason that the long dominant wavelength and good saturation obtained is due to strong emission of gaseous SrOH and the significant reduction of the detrimental orange emitter SrO(g). This is supported by both UV-VIS spectra and chemical equilibrium calculations. Additionally, the concomitant release of nitrogen expands the combustion plumes and helps to obtain high luminosities.

The new formulations are useful for civilian and military red burning pyrotechnics, chemically stable and are cheaper than polyvinyl chloride powder (PVC)-based formulations when hexamine is used as an additive (18 EUR/kg vs 90 EUR/kg). The use of established components rules out any unpleasant surprises with respect to chemical stability and toxicology.


Article Views: 3482

Sign in Area

Please sign in below

Additional Sign In options

Please note that to comment on an article you must be registered and logged in.
Registration is for free, you may already be registered to receive, e.g., the newsletter. When you register on this website, please ensure you view our terms and conditions. All comments are subject to moderation.

Article Comments - To add a comment please sign in

If you would like to reuse any content, in print or online, from, please contact us first for permission. more

CONNECT: on Facebook on Twitter on YouTube on LinkedIn Sign up for our free newsletter

Magazine of Chemistry Europe (16 European Chemical Societies)published by Wiley-VCH