Hydrogen Sulfide Sensors

  • ChemPubSoc Europe Logo
  • Author: Francesca Rita Novara
  • Published Date: 20 February 2016
  • Source / Publisher: Chemistry – A European Journal/Wiley-VCH
  • Copyright: Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim
thumbnail image: Hydrogen Sulfide Sensors

Related Societies

Sensors based on organic field–effect transistors (OFETs) are very promising electrical sensors because of their simple configuration, low cost, and great potential for miniaturization.

Lifeng Chi and colleagues, University of Münster, Germany, have developed a sensor which can detect concentrations of H2S as low as 1 ppb. This is to date the most sensitive H2S sensor based on organic semiconducting film. The sensor shows high sensitivity, excellent selectivity, and a fast response. The system uses a a spirobifluorene-based polymer OFET (pictured below), which was deposited onto modified SiO2/Si wafers and combined with gold electrodes.


Spirobifluorene-based polymer


For sensors based on thin films, the ability of the film to retain analytes is an important factor in the determination of the sensor performance, and can be tuned by regulating the thickness of the active layer. By thinning the active layer, both the absorption and the desorption speed of the analytes increase. However, the desorption speed rises faster than the absorption speed, thus leading to a reduction of the performance of the sensor. The team has revealed that for this system an optimal film thickness of approximately 20 nm is required to retain enough H2S in the active layer and thus reach the highest sensitivity.


This article is soon to feature in Chemistry ‒ A European Journal's up-coming "Women in Chemistry" special issue


Article Views: 1803

Sign in Area

Please sign in below

Additional Sign In options

Please note that to comment on an article you must be registered and logged in.
Registration is for free, you may already be registered to receive, e.g., the newsletter. When you register on this website, please ensure you view our terms and conditions. All comments are subject to moderation.

Article Comments - To add a comment please sign in

Bookmark and Share

If you would like to reuse any content, in print or online, from ChemistryViews.org, please contact us first for permission. more


ChemistryViews.org on Facebook

ChemistryViews.org on Twitter ChemistryViews.org on YouTube ChemistryViews.org on LinkedIn Sign up for our free newsletter

A product of ChemPubSoc Europe (16 European Chemical Societies)and Wiley-VCH