Cleaning Monuments with Ion Exchangers

  • Author: ChemistryViews.org
  • Published: 30 November 2017
  • Copyright: Wiley-VCH Verlag GmbH & Co. KGaA
  • Source / Publisher: Dalton Transactions/Royal Society of Chemistry (RSC)
  • Associated Societies: Royal Society of Chemistry (RSC), UK
thumbnail image: Cleaning Monuments with Ion Exchangers

Monuments are often made from carbonate-containing materials, such as marble. Exposure to pollution can change their composition and cause problems for their preservation. Acidic rain, for example, contains sulfuric acid that can convert calcium carbonate to gypsum, i.e, calcium sulfate. The resulting gypsum can absorb pollutants and turn the surface of the monuments dark over time.


Morena Nocchetti, University of Perugia, Italy, and colleagues have developed a combination of ion exchangers which can remove such gypsum crusts from stones. The team synthesized a layered double hydroxide of the form [Mg0.65Al0.35(OH)2]Cl0.35·0.6H2O using solutions of magnesium chloride, aluminum chloride, and urea. This compound acts as an anion exchanger. In addition, a semisodic form of α-zirconium phosphate, Zr(NaPO4)(HPO4)·5H2O, was prepared by combining zirconium phosphate with propylamine and a sodium chloride solution. This compound can act as a cation exchanger.


The researchers mixed the two ion exchange materials together with water to form a paste. This paste can replace sulfate with chloride and thus, dissolve gypsum. It can also prevent the reprecipitation of gypsum by replacing free calcium ions with sodium ions. The team tested the mixture on a fragment obtained from a historical sandstone wall at the University of Perugia. The paste was applied to the blackened stone, left for 75 minutes, and removed before it dried completely. This treatment was repeated. The color of the stone lightened considerably and X-ray powder diffraction (XRD) analysis showed that gypsum was removed, while MgAlSO4 was formed.


According to the researchers, the developed method is much faster than commonly used procedures and uses nontoxic and inexpensive materials. However, multiple treatments might be needed to remove thick gypsum crusts.


 

Article Views: 589

Sign in Area

Please sign in below

Additional Sign In options

Please note that to comment on an article you must be registered and logged in.
Registration is for free, you may already be registered to receive, e.g., the newsletter. When you register on this website, please ensure you view our terms and conditions. All comments are subject to moderation.

Article Comments - To add a comment please sign in

Bookmark and Share

If you would like to reuse any content, in print or online, from ChemistryViews.org, please contact us first for permission. more


CONNECT:

ChemistryViews.org on Facebook

ChemistryViews.org on Twitter ChemistryViews.org on YouTube ChemistryViews.org on LinkedIn Sign up for our free newsletter


A product of ChemPubSoc Europe (16 European Chemical Societies)and Wiley-VCH