Fabric Dyeing, Simplified

  • Author: Nancy McGuire
  • Published: 19 August 2015
  • Copyright: Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim
  • Source / Publisher: ACS Sustainable Chemistry and Engineering/American Chemical Society (ACS)
  • Associated Societies: American Chemical Society (ACS), USA
thumbnail image: Fabric Dyeing, Simplified

Industrial textile dyeing processes typically use 100 to 400 tons of water per ton of fiber, and they require high temperatures and pressures. Wastewater contains toxic dyes and additives that are difficult to remove. Environmentally benign processes tend to be expensive or require advanced equipment.


Giorgio Cevasco, University of Genoa, Italy, and colleagues have devised a dyeing method that uses only one fairly benign additive, and the wastewater can be used again and again. They tested nine ionic liquid additives with water and disperse Red 13 to dye wool, polyester, and cotton fabrics in an open vessel at 95 °C.


Without an additive, the dye produced a dull pink color on fabric samples, and simple rinsing removed some of the dye. Four of the ionic liquids increased dye adherence, producing an intense red color. The best combination of dye fixing, cost, and low toxicity was exhibited by 1-(2-hydroxyethyl)-3-methylimidazolium chloride.


Using 2 g/L of this ionic liquid, all of the dye is transferred to the fabric, and the wastewater has no color residue. The researchers re-used the same water bath three times, replenishing only the dye, not the ionic liquid, and they obtained the same color intensity and color-fastness results.


 

Article Views: 2325

Sign in Area

Please sign in below

Additional Sign In options

Please note that to comment on an article you must be registered and logged in.
Registration is for free, you may already be registered to receive, e.g., the newsletter. When you register on this website, please ensure you view our terms and conditions. All comments are subject to moderation.

Article Comments - To add a comment please sign in

Bookmark and Share

If you would like to reuse any content, in print or online, from ChemistryViews.org, please contact us first for permission. more


CONNECT:

ChemistryViews.org on Facebook

ChemistryViews.org on Twitter ChemistryViews.org on YouTube ChemistryViews.org on LinkedIn Sign up for our free newsletter


A product of ChemPubSoc Europe (16 European Chemical Societies)and Wiley-VCH